sasafilter.blogg.se - Large outdoor shade 12 x 12

#LARGE OUTDOOR SHADE 12 X 12 MANUAL#
#LARGE OUTDOOR SHADE 12 X 12 FREE#

#LARGE OUTDOOR SHADE 12 X 12 FREE#

If shipping damage exception number is obtained from carrier, all damaged/missing parts are replaced free of charge if reported within 30 business days of delivery.

Therefore rips, tears, or cuts in the fabric were either caused by the shipping company, opening the boxes with knives or scissors, or happened during installation. All shades are thoroughly inspected before they are carefully packaged to ensure they are pristine. Fabrics are cut with state-of-the-art lasers, seams are sonically welded, and our tables are rounded and smooth.

Please see our slide show on the Products Page that shows how carefully and meticulously our shades are manufactured and shipped.

If expedited shipping is desired, you may pay the difference between Ground and expedited shipping.

Under no circumstances are installer fees covered, regardless of whether it is a warranty issue or not.

Good for original owner of shades only.

We may check historic wind speed data in your area.

Shades must NOT be left down in winds greater than the product is rated for.

We will request photos and videos of your installation.

Shades must be installed correctly per instructions.

Suntex 90, 95 and 97 fabrics for 10 years, Phifer 4400 Clear Vinyl, Clear Vinyl with Solid Borders and Soltis Blackout for 5 years.

Fabric and motor warranties are unchanged.

IF INSTALLED WITHIN 3 MILES OF SALTWATER, cranks, housings, side rails, cables, and cable hardware have a reduced warranty of ONE year.

Cranks, housings, side rails, cables, cable hardware, fabric seams, for 10 years.

Motors, remotes, sensors, controls, for 5 years.

DO NOT ROLL SHADES DOWN IN WINDY CONDITIONS! Lower shades during calm conditions so the zippers don’t bind. If fully enclosing the structure one should be ordered with a crank or one opening left uncovered as an emergency egress.Ĩ.

#LARGE OUTDOOR SHADE 12 X 12 MANUAL#

Motorized shades do NOT have a manual override so if there is power out you will not be able to fully raise the shade. Do NOT use oil based lubricants as these will cause dirt to build up and affect the way the zipper operates.ħ. Lubricate the zippers and PVC inserts inside the rails with a dry silicone spray regularly to ensure smooth operation.Ħ. Make sure to hose down tracks first if you have not operated the shades for a while.ĥ. The tracks must be hosed down on a regular basis to make sure they are clear of dirt and debris before lifting or lowering the shade, or it will not function correctly. Stop and raise the shade again to re-engage the fabric and lower again. Reverse the direction and inspect the track for dirt & debris etc. Do not continue to operate a shade that appears to be jammed. Stop the shade if it is not operating correctly. Watch the shades when you are operating them. Housing box and side rails must be mounted flush with each other. You can roll your shades UP when it is windy, but NOT DOWN! Shades should be lowered during calm conditions so the zippers don’t bind.Ģ.

NEVER USE: Windex, Rain-X, Pledge, Plexus, Simple Green, Orpine, car wax or any other harsh cleaner.ġ. Follow up with IMAR Strataglass Protective Polish if necessary. If you accidentally scratch the clear vinyl window, you can polish the scratches away using Sumner Labs 210 Scratch remover.Wait 20 seconds or so and then wipe with a soft cloth-microfiber is the best. Apply IMAR 313 Clear Vinyl Clean & Protect (pictured below, comes included with your order) OR Sumner Labs 210 Plastic Cleaner and Polish.Clean the surface carefully to make sure there is nothing abrasive on the clear vinyl window by flushing with clear water.Caution needs to be exercised when working with the material. *Since it is very pliable, vinyl can easily be scratched.